Specified for the audio/video industrie, the PINK tv active meets all the demands for project studios, surround sound and high quality multimedia applications, as well. It's compact 2 way package (170x290x200mm), combined with the shielded magnetic field and the excellent stereo imaging, makes them very handsam to any set up required, even at very close listening distances.
As always at EMES, matched high quality drivers are chosen, because to us they are the most critical part in a high quality Studio Monitor System!
The Low range (68 - 1700Hz) is reproduced by a 14cm Fiberglass Membrane HDS-driver. This extrem low compression driver is contructed in a way so the air, normally sealed in the Air gap of the magnet system, now can circulated. Finally the Air flow is nearly non resistant to the coils movement, which results in very accuarate membrane excursion. The Impuls response and Low End precision is realy remarkable for a Monitor this size.
The high frequency section is molded into the baffel as a radial horn, coupled with a 25mm textile neodymium tweeter! The radial horn element is constructed in a way which minimizes distortion (see TDH diagram), allows us to use it down to 1700 Hz, mechanicaly align the Woofer and Tweeters Coil position and delivers a very homogenius dispersion pattern, so the higher frequencies are nicely distributed into the room! In keeping with the EMES compatible and interchangeable Monitoring philosophy, we have designed the AMBER and AMBER HR sub woofers. These units can accompany various models in our 2 way near field line as Sub-Bass Units (see also EMES MODUMO (Modular Monitoring) brochure) or as a Sub-Woofer in a 5.1 surround system. We have chosen a single Driver design to make the AMBER as compact as possible. A Compact Sub - that can deliver really good low end?!?! 28 Hz on the AMBER HR. If you need more then you still have the option to stack two of them together! To achieve these figures in a compact sized cabinet, you need a specially designed driver - the EMES XLS-Driver! This 10 inch dual coil long excursion Fibreglass Membrane XLS-driver is a very low compression driver with a coil excursion of +/- 16mm. The driver is constructed in such a way so that the air, normally sealed in the Air gap of the magnet system, can circulate. Finally the Airflow is nearly non resistant to the coil movement, which results in a very accurate (linear) membrane excursion. The Impulse response and Low End precision is really remarkable for Sub-Bass unit this small! And there is no heat related compression either! To support the driver specs we have equipped the removable active electronics with a powerful 2 x 160W amplifier module! The AMBER HR has everything on board to allow the units to be used as a Sub-Woofer for multi channel applications, plus functions and controls dedicated to use with our near fields to build a modular 3 way Monitoring system.
